Do You Have to Replace Your Windows to Get CLiC Glass?

Taylor Hancock • October 31, 2026

Share this article

No, you do not have to replace your windows to get CLiC glass. New windows with factory CLiC are one route, but a CLiC panel can also be fitted into an existing opening when the window itself is sound.

Which route fits depends on three things: the condition of your frames, how many openings you want, and how much wall work you are willing to take on. This guide helps Redmond homeowners sort it out.

New to the product? Start with our overview of CLiC glass installation in Redmond.

The Short Answer: Three Ways to Get CLiC Glass

You have three ways to get CLiC smart privacy glass into a Central Oregon home:

Each one works. The best choice is usually obvious once someone looks at the window and the wall around it.

Option One: New Windows With Factory CLiC

CLiC is made by Cardinal IG, and window makers such as Marvin and Kolbe offer it as a factory option. You can read the manufacturer details at CLiC smart privacy glass by Cardinal IG.

Best fit: a new build, or a home where the windows are due for replacement anyway. Power is planned with the order, so nothing in the finished wall has to be reopened later. Weighing frame materials? See our comparison of vinyl vs fiberglass windows in Central Oregon.

Poor fit: windows that are already in good shape. Replacing sound windows only to add privacy glass to one bathroom is a large project for a small gain.

Option Two: Add CLiC to Your Existing Windows (Retrofit)

Best fit: frames that are straight, seals that are tight, and trim in good condition. A retrofit lets you keep them. Here is how the job goes:

  • The glass is measured
  • A CLiC panel is made to fit the opening
  • Power is run to the window
  • The wall is restored

We cover each step in our post on CLiC glass retrofit in Redmond.

This is the route we see most often for a single bathroom window, an entry sidelight, or a bedroom that faces the street. You get the privacy control in the exact opening you care about, and the rest of the house stays as it is.

Bathroom window with CLiC smart privacy glass set to clear, showing trees and rooftops outside, in a dark tiled bathroom with a wood vanity

Option Three: Add CLiC During Full Frame Replacement

When the frames are the problem, this is the strongest option. A full frame replacement removes the old window, the frame, and the trim, so the opening is exposed and the power connection can be planned cleanly.

If you are already facing full frame window replacement in Redmond, adding CLiC to one or two openings costs less in labor than reopening the wall later.

Not sure whether you need a full frame or an insert? Compare full frame vs insert windows in Redmond, OR. Replacing most of the house? See how to phase a whole house window replacement in Redmond.

Signs Your Windows Should Be Replaced First

Putting a premium glass product into a failing window wastes money. Look at the window before you commit to CLiC. These are the warning signs:

  • Soft or rotted wood at the sill or jamb
  • Fogging or moisture between the panes, which points to a failed seal
  • Drafts, or a frame that no longer closes square
  • Water stains on the wall below the window
  • Windows that are old enough that you plan to replace most of them soon

If two or more of these apply, replace first. If you need several windows replaced across the house, our residential glass replacement in Redmond page explains how we handle larger projects.

Want to catch trouble early? Read about the warning signs of a failing window and when to repair versus replace.

Which Costs Less: A CLiC Retrofit or Full Frame Replacement?

There is no single answer, because the price depends on the home. These are the factors that move the number:

  • The size and number of CLiC panels
  • How far power has to travel to reach each window
  • Where the control sits, such as a wall switch or a smart home system
  • How much finished drywall has to be opened and restored
  • If the window itself needs to be replaced

For one or two openings in sound windows, a retrofit is usually the lower cost route. For a whole house with aging windows, adding CLiC during replacement usually makes more sense.

We give a written estimate after measuring, so you see the glass, the power work, and the wall restoration as separate lines. For a baseline on the window side, see window replacement cost in Redmond, OR.

Is CLiC Even the Right Product for the Room?

CLiC earns its price where you want daylight and privacy in the same opening, such as a bathroom beside a tub or a window that looks at a neighbor. In other rooms, a blind may serve you better.

Our comparison of CLiC smart glass vs blinds and window film lays out the tradeoffs.

Why Glass Daddy Redmond Can Help You Choose

Many companies only sell one route. A window dealer pushes new windows, and a glass shop that avoids wall work pushes blinds or film. Glass Daddy Redmond handles full frame replacement and CLiC retrofits, so our advice follows your window and your wall, not our schedule.

We serve Redmond, Bend, Terrebonne, Powell Butte, Eagle Crest, and Tumalo. See all of our Central Oregon service areas. We work under CCB 236893.

Frequently Asked Questions

Do I have to replace my windows to get CLiC glass?

No. CLiC can come built into new windows from the factory, or a CLiC panel can be fitted into an existing opening when the window is in good condition. If the window is failing, adding CLiC during a full frame replacement is often simpler.

Can CLiC be added to just one window in my house?

Yes. Many Redmond homeowners add CLiC to a single bathroom window, entry sidelight, or street facing bedroom. The rest of the windows stay as they are.

When should I replace the window before adding CLiC?

Replace first if the window has rot, a failed seal, drafts, or water damage. CLiC is a premium product, and it should go into a frame that will last. A failing window is better handled through full frame replacement with CLiC added during the same project.

Not sure how bad it is? See when you need full frame vs glass-only replacement.

Is a CLiC retrofit or a full frame replacement cheaper?

For one or two openings in sound windows, a retrofit is usually the lower cost route. For several aging windows, adding CLiC during replacement usually costs less in labor than reopening finished walls later. Glass Daddy Redmond gives a written estimate after measuring.

Get a CLiC Estimate in Redmond

Not sure which route fits your home? We will look at the windows and the walls, tell you what we would do, and give you a clear price. Request a free CLiC estimate in Redmond or call (541) 527-7080.

Recent Posts

Before-and-after of a Redmond, Oregon home with new replacement windows
By Taylor Hancock • November 21, 2026
Looking for a local glazier in Redmond and Deschutes County? Compare glass-only vs full-frame window replacement, costs, and how to get a quick turnaround.
Office glass walls with frosted horizontal privacy bands in a commercial interior
By Taylor Hancock • November 9, 2026
Planning glass office partitions in Redmond, OR? Glass Daddy Redmond explains glass types, doors, privacy, sound control, safety codes and costs for offices.
CLiC smart privacy glass retrofit in a Redmond, Oregon home
By Taylor Hancock • October 29, 2026
CLiC glass retrofit in Redmond, OR: what the job involves, why few glaziers take it on, and when to retrofit or replace. Request a free local estimate today.
CLiC smart privacy glass window in a modern bathroom installed by Glass Daddy Redmond
By Taylor Hancock • October 16, 2026
CLiC smart glass vs blinds and window film in Redmond, OR. See how switchable privacy glass works, where it fits, and the best time to add it to your home.
Modern beige bathroom with glass-enclosed walk-in shower and tiled tub surround
By Taylor Hancock • September 23, 2026
Shower glass costs in Redmond, Oregon, with real price ranges for framed, semi frameless, and frameless enclosures and a line by line guide to reading your quote.
Modern bathroom with glass shower enclosure, white oval tub, tiled walls, and patterned floor.
By Taylor Hancock • September 9, 2026
Framed or frameless shower doors in Redmond, Oregon? Compare glass thickness, hardware, cost ranges, cleaning, and durability before you pick an enclosure.
Before-and-after of a house entryway with updated siding, window trim, and front door area.
By Taylor Hancock • August 26, 2026
What it costs to replace every window in a house in a Redmond, Oregon home, how many days the install takes, and the smartest order to phase the project on a budget.
Glass Daddy Redmond vans parked outside of Sportsmans Warehouse for a Commercial Glass repair.
By Taylor Hancock • August 11, 2026
Commercial glass costs in Redmond, Oregon. Storefront systems, commercial glass doors, and window installation pricing, lead times, and how to compare glazing bids.
Two incredible glass Steam Showers expertly installed by Glass Daddy Redmond in Madras, Oregon.
By Taylor Hancock • July 24, 2026
Steam shower enclosures in Madras, OR need full-height glass, vapor seals, and transoms. Learn what changes and what it truly costs from Glass Daddy Redmond.
Beautiful CliC Glass installed done by Glass Daddy Redmond in Redmond, OR
By Taylor Hancock • July 8, 2026
Glass Daddy Redmond installs CLiC smart privacy glass in Redmond, OR. Switch windows from clear to private instantly, retrofit or new. Get a free local estimate today.
Show More